Slide coatings

The extraordinary sliding properties of fluoropolymers, with low friction values against a wide range of substrates, are well known. Metals, plastics, paper and food are conveyed much more smoothly in production processes when coatings like these are used. Lubricants can be added to the surface treatment for use as dry lubrication. The slight difference between the static and dynamic friction values is of great benefit during reciprocal motions to reduce the drive force and prevent a stick-slip effect.

Impreglon products for optimal sliding properties

  • AF

    Antifricor®

    Multifunctional dry lubrication

    With antifricor®, Impreglon offers a proven combination system to optimize friction, wear and lubrication of components moving against each other. Reduced friction with antifricor® leads to a longer service life of the friction partners...

  • CC

    ChemCoat®

    High-quality nonstick coatings and slide coatings

    The ChemCoat® coating procedure creates a high-quality surface coating with excellent nonstick properties and/or very good sliding properties.

  • SC

    SafeCoat®

    Functional coatings based on fluoropolymers

    SafeCoat® coatings improve the nonstick and sliding properties and provide corrosion protection for components. A variety of different polymer and fluoropolymer coatings create an optimal characteristic profile for any application.

  • TC

    TempCoat®

    Wear resistant slide coatings with nonstick properties

    The TempCoat® coating procedure creates polymer and fluoropolymer layers with outstanding nonstick properties and very good sliding properties.

Antifricor® – Multifunctional dry lubrication

With antifricor®, Impreglon offers a proven combination system to optimize friction, wear and lubrication of components moving against each other. Reduced friction with antifricor® leads to a longer service life of the friction partners (see the grease lubrication graphic for comparison).

antifricor® is suitable for all applications where friction forces reduce functionality and durability of components. Wear resistance, dry lubrication and corrosion protection are combined effectively in one coating system.

antifricor® is used by almost all major automotive manufacturers. Typical parts are hinges, door locks, door stays, door handles, adjustment systems, fittings and other fasteners.

Coating thicknesses: 100 µm to 800 µm
Temperature range: -40 °C to +260 °C
Surface Roughnesses (Ra): up to approx. 1.5 µm
FDA-approved: yes, with certain coating types
Dry film lubricant
Corrosion protection
Substrate

ChemCoat® – High-quality nonstick coatings and slide coatings

The ChemCoat® coating procedure creates a high-quality surface coating with excellent nonstick properties and/or very good sliding properties. Thanks to our special infusion process, our ChemCoat® polymer coatings and fluoropolymer coatings are particularly well anchored to the substrate.

ChemCoat® nonstick coatings can be applied to aluminum, steel, stainless steel, ceramics and some coppers They are used in particular in applications requiring good sliding and nonstick properties, as well as high wear resistance.

Coating thicknesses: 7 µm to 70 µm
Temperature range: -40 °C to +260 °C
Surface Roughnesses (Ra): up to approx. 1.5 µm
FDA-approved: yes, with certain coating types
Fluoropolymer layer
Substrate

SafeCoat® – Functional coatings based on fluoropolymers

SafeCoat® coatings improve the nonstick and sliding properties and provide corrosion protection for components. A variety of different polymer and fluoropolymer coatings create an optimal characteristic profile for any application.

SafeCoat® nonstick coatings prevent adhesion, improve production processes and reduce the cleaning required for machine components. By reducing the frictional resistance, SafeCoat® helps to speed up production processes and removes the constant need for lubricants. SafeCoat® corrosion protection coatings increase the service life of machine and system components and reduce unnecessary machine downtime.

FDA-approved: yes, with certain coating types
Coating thickness: 15 µm to 1.5 mm
Temperature range: up to +290 °C
Polymer layer
Reinforcement layer (alternative)
Compound layer (alternative)
Substrate

TempCoat® – Wear resistant slide coatings with nonstick properties

The TempCoat® coating procedure creates polymer and fluoropolymer layers with outstanding nonstick properties and very good sliding properties.

With additional reinforcement layers, slide coatings can be combined with high wear resistance.

TempCoat® coatings can be applied on aluminum, steel, stainless steel, copper, ceramics and even plastics.

Coating thicknesses: 10 µm to 100 µm
Temperature range: -40 °C to +285 °C
Surface roughnesses (Ra): up to approx. 1.0 µm
FDA-approved: yes, with certain coating types
Fluorpolymer layer
Reinforcement layer (alternative)
Compound layer (alternative)
Substrate

Locations for Coating: Slide coatings

Landsberg

Impreglon Beschichtungen GmbH
Albert-Einstein-Straße 16
86899 Landsberg
Germany
1 +49 8191 911 86-10
+49 8191 911 86-12
landsberg@impreglon.de
Local Site

Lübeck

Impreglon Material Technology GmbH
Seelandstr. 7
23569 Lübeck
Germany
1 +49 451 39 006-0
+49 451 39 006-31
luebeck@impreglon.de
Local Site

Lüneburg

Impreglon Oberflächentechnik GmbH
Hohenhorststraße 1
21337 Lüneburg
Germany
1 +49 4131 882-10
+49 4131 882-250
lueneburg@impreglon.de
Local Site

Nidda-Borsdorf

Impreglon Beschichtungen GmbH
Zeppelinstraße 13
63667 Nidda-Borsdorf
Germany
1 +49 6043 9613-0
+49 6043 6075
nidda@impreglon.de
Local Site

Obrigheim

Impreglon Surface Technology GmbH
Kraichgaublick 21
74847 Obrigheim
Germany
1 +49 6262 9221-0
+49 6262 9221-25
obrigheim@impreglon.de
Local Site

Tatabànya

Impreglon Ungarn Kft.
Buzavirag u. 16
2800 Tatabànya
Hungary
10 +36 34 514670
+36 34 514680
info@impreglon.hu
Local Site

Minto

Impreglon Australia Pty Ltd
67 - 77 Airds Road
MINTO NSW 2566
Australia
11 +61 2 9603 2388
+61 2 9603 5253
sales@impreglon.com.au
Local Site

Pulversheim

Impreglon France SAS
Air de la Thur
68840 Pulversheim
France
2 +33 3 89 28 32 80
+33 3 89 28 32 89
info@impreglon.fr
Local Site

Löddeköpinge

Impreglon Sverige AB
Mobilvägen 1
246 43 Löddeköpinge
Sweden
3 +46 46 706 500
+46 46 706 900
info@impreglon.se
Local Site

Altdorf

Impreglon Coatings AG
Industriezone Schächenwald
6460 Altdorf
Switzerland
4 +41 41 875 7490
+41 41 875 7297
altdorf@impreglon.ch
Local Site

Tamworth

Impreglon UK Ltd.
Kingsbury Link, Trinity Road
Tamworth B78 2EX
United Kingdom
5 +44 1827 871400
+44 1827 871401
info@impreglon.co.uk
Local Site

Beuningen

Impreglon B.V.
Nikkelwerf 5
6641 TM Beuningen
Netherlands
6 +31 24 677 79 11
+31 24 677 8901
info@impreglon.nl
Local Site

Deurne

Impreglon Surface Technology BV
Vuurijzer 1
5753 SV Deurne
Netherlands
6 +31 493 352 820
+31 493 352 858
deurne@impreglon.nl
Local Site

Baltimore

Impreglon, Inc.
2915 Wilmarco Avenue
Baltimore, MD 21223
U.S.A.
7 +1 410 644 4500
+1 410 644 1766
info@impreglon-baltimore.us
Local Site

Cleveland

Impreglon Tennessee Inc.
162 Corporate Drive, SW
Cleveland, TN 37311-8083
U.S.A.
7 +1 423 559 9900
+1 423 559 1239
info@impreglon-tennessee.us
Local Site

Fairburn

Impreglon Inc.
220 Fairburn Ind. Blvd.
30213 Fairburn, GA
U.S.A.
7 +1 770 969 9191
+1 770 969 9192
info@impreglon.us
Local Site

Houston

Impreglon Surface Technologies, Inc.
6421 Lozano Drive
Houston, Texas 77041
U.S.A.
7 +1 713 466 9655
+1 713 466 1762
info@impreglonsurfacetechnologies.us
Local Site

Michigan

Impreglon Inc.
225 North Roeske Avenue
Michigan City, Indiana 46360
U.S.A.
7 +1 800 640 0090
+1 888 890 0077
michianaimp@ameritech.net

Milwaukee

Impreglon Cellramic
8399 N. 87 th St.
PO Box 241370
Milwaukee, WI 53224
U.S.A.
7 +1 414 357 0260
+1 414 357 0267
info@impreglon-cellramic.us
Local Site